Stephanienorsworthy

Revenue So, you’re a CEO, CFO or COO of a company struggling to generate demand for your products or services. You decide on a new or tweaked strategy that will get your revenue on the right track, back to growth or new areas for growth. You implement the changes. While efforts are continuing to make the behavioral and tactical improvements to achieve the goals and objectives you have set forth in your strategy, you begin to look further into what else can be done to improve the company financials.

Profitability Whether or not your company is grappling with revenue issues, you and your Board are always interested in ways to improve profitability. You look more closely at where you can cut the fat, if there’s any left to cut. Your largest operating expense is your employees. Like many companies in America in the recent and not so recent past, you consider starting a new round of budget cuts in salaries, benefits and even people. Can you really afford to cut or possibly discourage your troop’s way to more productivity?

Energy Expenses If you house your organization in expansive facilities, another large operating expense is your monthly/yearly/ever-present electric bill. What can you do about that, the power company has a monopoly in your geography as it does in most. The least expensive steps you can take are to ask employees to turn-off lights and reduce the comfort level of the thermostat setting. Have you ever walked into a government, commercial or industrial build that is dimly lit or is too warm and stuffy, or even too cold during the winter. Not a very attractive place to visit, let alone work.

Technical Solution to a Financial Problem You may want to consider the things you can do to reduce your power consumption that give you an attractive payback and ROI. Treating your motors, lighting, HVAC and refrigeration systems can give you the best bang-for-your-buck, when the proven approaches and technologies are engineered and installed properly. It may also help your decision to move forward with such a project if it is guaranteed every step of the way, including your continued savings after the installation and throughout your payback period. In terms of savings, the project should result in the gift that keeps on giving, for a couple of decades.

Caveat Emptor Words of caution, when considering such a solution, make sure that you award your project to an engineering firm with experience in designing, installing and guaranteeing your project and results. And be certain you are not hiring a performance contractor or a company that has you sign a long-term contact sharing in your savings for a decade or more by replacing your hardware with insufficient new motors, lighting, HVAC or refrigeration. Otherwise, you could be better off dimming the lights yourself!

LEED Certified and Green Technology, Energy Edge Technologies can help save your Industrial, Hospital, Grocery Store or any other high energy commercial buildings massive amounts of money! We Take A Full Facility Approach or call 888-729-5722 Ext. 100.

Energy Efficiency in the home is very important as you do not want to be paying for heat or cooling that is simply escaping out of your home or business and ultimately heating or cooling the neighborhood. Basically you always want to try your best to use less energy for the same amount of results you are currently accustomed to. One way to achieve this is by using the proper type and amount of insulation. Another example of this type of efficiency is using natural light instead of light bulbs to brighten the room.

Many new buildings are being constructed to be energy efficient and older buildings can be inspected to determine what can be done to make your home or business more efficient. Being energy efficient is the number one solution for stopping and reversing global warming. Of course using renewable energy sources instead of burning fossil fuels is the other solution.

The other important benefit of being truly energy efficient is that efficiency will significantly reduce your energy costs and allow you to retain monies that otherwise would be given to the utility companies. Keep in mind though that making your home or business truly efficient will require an investment on your part. The good news is that the investment usually comes with a strong ROI and the investment will likely be paid back after only a few short years. In addition to insulation and day lighting opportunities, look to higher efficiency equipment and appliances to help improve energy efficiency.

Most of today’s energy efficient appliances and equipment uses much less energy than the comparable older models. By using less power this reduces the amount of carbon dioxide emission released into the atmosphere during the electricity generation process. These appliances and equipment are given efficiency ratings and the Energy Star label. When the appliances or equipment are not in use they will either turn off or go into a low energy mode. So if your appliances or equipment are at the end of their useful life, consider replacing them with new, high efficiency models.

There are several things you can change in your home or business to make it more energy efficient. Another is to make sure your window seals are tight and not letting air in or out. Many times this may mean getting replacement windows or caulking the edges. You also may need to add double glazed windows or different insulation.

Again, there are many ways you can make your home and business energy efficient so go out a get it done!

LEED Certified and Green Technology, Energy Edge Technologies can help save your Industrial, Hospital, Grocery Store or any other high energy commercial buildings massive amounts of money! We Take A Full Facility Approach or call 888-729-5722 Ext. 100.

There are several rankings and benchmarks for corporate energy efficiency and corporations can perform an energy audit to see where they can improve with their energy usage. Corporations should look into how many kilowatts they use per square foot and how much gas or BTUs are used per square foot. Each country will have average values and recommended values for being efficient.

If you are looking to improve your company’s energy usage you can look into the different products available as each vendor will have information about its products’ energy consumption. For example, glass companies will provide information on their products’ solar heat gain and U-value, and so on.

Many more corporations are creating positions that deal specifically with energy management and many times there is compensation or benefits for those corporations that have good energy performance. There are several different ways in which corporations can make changes to their energy usage and ultimately enjoy big energy savings.

You want to make sure that your building is properly maintained as this keeps it running as efficiently as possible. Small changes can actually cause big changes in energy consumption. One such example is not running the air conditioning at night if no one is in the building. Also you can go through a retro-commissioning process to get your building back to its original state.

Steam systems are frequently an issue with energy usage as they are not maintained well. Steam traps tend to be used to deal with condensation but these can easily become stuck open and transfer the steam back into the boiler. This wastes a lot of heat as the steam goes back into the system and does not heat the building. You need to make sure these are replaced regularly and maintained well.

You also want to optimize your HVAC systems and these can account for 20 percent or more of all energy used in a building. And lastly, you might want to look into thermal energy storage or heat recovery options.

LEED Certified and Green Technology, Energy Edge Technologies can help save your Industrial, Hospital, Grocery Store or any other high energy commercial buildings massive amounts of money! We Take A Full Facility Approach or call 888-729-5722 Ext. 100.

In today’s economic world, with a global recession affecting most nations, it’s important to cut down on costs wherever possible. This is especially true for large corporations, where the imperative is to try to save money, preserve profit and keep job losses at a minimum. One of the most common ways to cut expenses is to try and reduce the company electric bill where they can.

There are several ways to save on electricity. The most common one is to make sure the office lights are turned off when they’re not needed. The light bulbs can also be changed to low-energy models or compact fluorescent or LED bulbs. Air conditioning and heating shouldn’t be used excessively and should be maintained and serviced regularly.

Programmable thermostats should be used in office buildings and access should only be given to certain people. Getting an energy audit may also help and asking the electric company itself on how to cut down on electricity is a good idea.

When a computer isn’t being used it should be turned off or placed in standby or hibernation mode. Doors and windows should be checked for cracks and leaks as this can let in both hot and cold air depending on the season. Cell phone chargers and microwave ovens and other electrical consuming devices should be unplugged or placed on bypass as well when they’re not in use.

Depending on where you operate, you may also have the option of changing service providers. If this is possible, check out the rates of all electricity and gas providers in your area. You will of course, want to go with the cheapest rates possible without jeopardizing service quality.

It’s a good idea for businesses to calculate their electricity cost if they want to save on company electric bill. If they know exactly how many kilowatt hours are being used up it will help. They can also check out the internet for articles and tips on how to reduce their costs. Many of these tips can then be integrated into their energy-saving plans.

Ultimately, a professional energy services company or engineering firm will be a valuable resource once you have picked off the low hanging fruit mentioned above. These companies can help you design and implement long term strategies and technologies to significantly reduce your energy consumption and corresponding costs.

LEED Certified and Green Technology, Energy Edge Technologies can help save your Industrial, Hospital, Grocery Store or any other high energy commercial buildings massive amounts of money! We Take A Full Facility Approach or call 888-729-5722 Ext. 100.

In today’s energy climate more and more people have become motivated to accomplish what they can to become more energy efficient to conserve energy and money. Regrettably this same climate has encouraged some to take advantage of innocent consumers’ desires to save energy and reduce operating expenses.

Vendors that advertise power factor improvement (kVAR correction) and transient voltage suppression to save energy are a good case in point of this bad trend. Recently we are seeing more and more of these businesses cropping up and we believe it is time to set the record straight.

First off, transient voltage surge suppression (TVSS) plays an important part in improving power quality to guard sensitive equipment inside a facility. However, TVSS does not save energy. TVSS’s are barely active an infinitesimal portion of a second to defend against voltage surges which only last for less than a millisecond. To actually decrease energy use the TVSS would need to essentially cut power consumption for an extended amount of time which is not what they are designed to do. Again, TVSS is essential to protect susceptible electrical equipment but consumers should steer clear of vendors promising, or even guaranteeing, a reduction in energy consumption.

And what about salespeople who maintain that increasing power factor will save 15% or 20% or 30% of energy consumption and resultant costs? This is false but also a bit trickier.

For homes, power factor correction does zero to save energy because the average home already has an average power factor of approximately 0.97 which is nearly the perfect power factor of 1 or unity. Additionally, the unit (called a capacitor) is installed at the homes main circuit breaker. According to IEEE 5.5.3.3 capacitors must be located at or near the individual inductive motor loads to decrease power system losses by reducing heat and distribution losses known as I2R losses.

So what about commercial and industrial facilities looking to use power factor correction to shrink energy expenditures? It is completely appropriate for a business that is incurring penalties or a kVA billing structure from the utility company to improve the facility’s overall power factor by installing a capacitor bank at the main electrical service entrance or individual capacitors at or near the particular motor loads. Doing so will do away with the power factor penalties and/or reduce the kVA demand charges on the electric bill which can save considerable money and provide a significant ROI on the investment.

But what about power factor correction reducing kWh consumption? IEEE also tells us that at most I2R losses only account for 2 to 5% of the total load in a facility. Simple arithmetic tells us that it would be in opposition to the laws of physics to obtain the 15% to 30% energy reduction claimed by some vendors. Consider it. Even if your facility had 5% distribution losses and you could correct 100% of the predicament via power factor correction at every load (which can’t be done) you would still save no more than 5% at most. No where close to the claims of some capacitor reps and manufacturers.

All that said, power factor correction when done appropriately will eliminate utility penalties and kVA demand charges, improve facility power quality, increase electrical system capacity, and save a modicum of energy when applied at the proper motor loads in an industrial facility.

So make an investment in transient voltage surge suppression and power factor correction when appropriate and necessary. But caveat emptor!

LEED Certified and Green Technology, Energy Edge Technologies can help save your Industrial, Hospital, Grocery Store or any other high energy commercial buildings massive amounts of money! We Take A Full Facility Approach or call 888-729-5722 Ext. 100.

Today’s energy conscious climate has motivated many to do what they can to become more efficient and conserve energy and money. Unfortunately this same climate has prompted others to take advantage of unsuspecting consumers’ wishes to save energy and reduce expenses.

Companies that tout power factor improvement (kVAR correction) and transient voltage suppression are a good example of this bad trend. Lately we are seeing more and more of these companies cropping up and feel it is time to set the record straight.

First, transient voltage surge suppression (TVSS) plays a valuable role in improving power quality to protect sensitive equipment inside a facility. However, TVSS does not save energy. TVSS’s are only active a tiny fraction of a second to protect against voltage surges which only last for less than a millisecond. To actually reduce energy consumption the TVSS would need to actually cut power consumption for an extended period of time which is not what they are designed to do. Again, TVSS is important to protect sensitive electrical equipment but buyers should avoid vendors promising, or even guaranteeing, that they will reduce energy consumption.

Now what about vendors who claim that improving power factor will save 15% or 20% or 30% of energy consumption and corresponding cost? This one is a little trickier.

For residential applications, power factor does nothing to save energy because the typical home already has an average power factor of about 0.97 which is almost the perfect power factor of 1 or unity. In addition, the device (called a capacitor) is placed at the main circuit breaker. According to IEEE 5.5.3.3 capacitors must be situated at or near the respective inductive loads to reduce power system losses by reducing heat and distribution losses known as I2R losses.

So what about commercial and industrial facilities using power factor correction to reduce energy costs? It is perfectly appropriate for a company that is incurring penalties or a kVA billing structure from the utility company to improve the facility’s overall power factor by employing a capacitor bank at the main service entrance or individual capacitors at or near the respective motor loads. Doing so will eliminate the power factor penalties and/or reduce the kVA demand charges on the utility bill which can save significant money and provide a significant ROI on the investment.

But what about power factor correction reducing kWh consumption? IEEE also tells us that I2R losses only account for 2 to 5% of the total load in a facility. Simple math tells us that it would be against the laws of physics to get the 15% to 30% energy reduction claimed by some vendors. Think about it. Even if your facility had 5% distribution losses and you could correct 100% of the problem via power factor correction at every load (which can’t be done) you would still only save 5% at the most. No where near the claims of some capacitor vendors and manufacturers.

All that said, power factor correction when done properly will eliminate utility penalties and kVA demand charges, improve facility power quality, increase electrical system capacity, and save a little energy when applied to the appropriate motor loads.

So make an investment in transient voltage surge suppression and power factor correction when appropriate and necessary. But caveat emptor!

LEED Certified and Green Technology, Energy Edge Technologies can help save your Industrial, Hospital, Grocery Store or any other high energy commercial buildings massive amounts of money! We Take A Full Facility Approach or call 888-729-5722 Ext. 100.

In our current world economy, we are all trying to find ways to lower our monthly bills. All of us want to learn how to spend less money on food, ways to lower our transportation costs, and ways to lower our utility bills. We all would like to reduce the amount of money we pay for electricity and other energy sources. There are many things you can do to improve the energy efficiency of your home, and save money in the process.

Turn out your lights when you are not home. When you leave the house, leave on as few lights as possible. For safety reasons, lots of people like to leave on a light or two, but make sure that you do this only when it is absolutely necessary.

Make sure your house is properly insulated. This will help the house to maintain higher temperatures and reduce the amount of heat energy necessary during the winter.

If your computer or other appliances have an energy-saving mode, make sure that you choose this setting.

Unplug your cell-phone charger when you are not using it. If you leave it plugged in while it is not charging anything, you are wasting electricity.

Install fluorescent light bulbs. They use much less energy than traditional light bulbs. Also, make sure that your house has windows and skylights that allow you to optimize your use of daylight.

Limit the number of electrical devices you are using at once. If you have the television on, turn off the computer. If you are listening to the radio, make sure the television is not on. This is good for peace of mind as well as cutting costs.

These are just a few ways that you can save energy. You also might consider having an energy efficiency expert evaluate your home to figure out other ways you could cut down on your energy use. This will benefit the environment and your budget!

LEED Certified and Green Technology, Energy Edge Technologies can help save your Industrial, Hospital, Grocery Store or any other high energy commercial buildings massive amounts of money! We Take A Full Facility Approach or call 888-729-5722 Ext. 100.

There are many different types of renewable energy that can be used in place of energy created by burning fossil fuels. Renewable energy is generated from geothermal heat, sunlight, tides, rain and wind. All of which will naturally replenish. Currently only about 20% of the worlds energy consumption uses natural energy sources.

One of the cleanest and most efficient types of renewable energy is wind power which is slowly gaining in popularity and usage. Wind power is seen more in Europe though many countries are building off shore wind farms. Only a light breeze is needed to generate power and the energy conversion is one of the most efficient of all renewable sources.

Renewable energy is not only being used in large scale production but many can be scaled down to use for small grid or even residential use. The best example of this would be solar power. Solar power takes the suns light and converts it to electricity using solar cells. Solar can easily supplement current electricity usage and some business and people are finding that they no longer pay an electricity bill after conversion to solar power.

Hydropower has been used for years via construction and operation of dams. Most people are familiar with Hoover Dam which is the largest hydropower station in the world. As water flows from a high spot to a low spot it gives off energy which can be transformed into different types of power such as electrical. You also can use hydropower without dams in rivers and oceans as long as there is a current or tide.

Biofuels are mainly based on bioalcohol or bioethanol. This fuel is produced from fermenting soy or sugar that comes from plants. This pure form can then be used instead of gasoline. Biodiesel is an oil made from animal fat, vegetable oils and recycled grease. Although these fuels when burned produce emissions, they are much cleaner than the traditional petrol.

So now that you know, consider how you can make changes and choices to take advantage of these alternatives.

LEED Certified and Green Technology, Energy Edge Technologies can help save your Industrial, Hospital, Grocery Store or any other high energy commercial buildings massive amounts of money! We Take A Full Facility Approach or call 888-729-5722 Ext. 100.

There are plenty of things you can do to demonstrate better energy efficiency. Everyone knows the big ones such as recycle and turn off the lights. But there are other small things that can really add up. They may seem odd or like slight inconveniences, but the small magnitude of the inconvenience will completely disappear once it becomes a part of your regular schedule.

The first thing is to unplug all chargers when you are done with them. Many people have their cell phone, camera, or MP3 chargers in the same spot, always ready to go for convenience purposes as we are all always rushing out the door. However, leaving something just simply plugged in can drain electricity and at the same time serves no purpose.

Another thing would be to car pool or take public transportation. These are likewise inconveniences to many people, especially on days when they are running late. However, sticking to a schedule like this may actually make you more punctual and aware of your time. It also can be much cheaper for you. Your car will last longer and your petrol bill will go way down.

You should also start recycling the little bits of plastic you may not even realize can be recycled. For example, many people just throw away the plastic trays from TV dinners. This is hugely impractical, since they can be easily rinsed out and recycled.

Many people throw away lots of little bits of paper like sticky notes, or bits of plastic, like from a candy wrapper. This plastic is merely going to sit in a land fill. Why not put it to good use? These things all add up, so we need to be smart about them. If everyone merely took a step back and looked at what they were really wasting–and knew the life of an object after it was thrown away–people would save so much more in terms of recycling and reusing

Save Money On Your Company’s Energy Bill, visit Energy Edge Technologies site for strategies on saving a tremendous amount of capital on your Corporate Energy Bill or call 888-729-5722 Ext. 100.

Hospitals and Medical Centers have many opportunities to significantly reduce and manage their energy costs while maintaining or even improving patient care and comfort.

Healthcare facilities are significant energy consumers, typically using an average of 28 kWh and 110 cubic feet of gas per square foot. HVAC (including cooling and space heating) represents about 62% of hospital energy use with lighting comprising 13% more. Focusing on these two areas with their combined 75% of total energy usage is very useful for developing an energy efficiency plan.

However, knowing where to focus does not mean it is always clear exactly where to start. By taking a carefully planned “whole facility” approach, it is easier to feel confident that you are making the best, most financially and operationally prudent energy efficiency choices for your unique facility. In today’s industry there are proven and recommended engineering approaches and technologies available that can guarantee results. And by working with an experienced, energy services company or engineering firm, choosing the right options does not need to be complicated.

The best first step is always to focus on quick, low cost or no cost solutions. This can include training staff to turn lights off when they leave unoccupied rooms, using sleep mode settings for computers when not in use, shutting off AHUs that serve unoccupied areas at night such as cafeterias, offices, conference rooms, etc, using programmable thermostats in rooms and areas not occupied 24 Hrs / day to turn up or down temperatures in different seasons, and having the HVAC systems serviced and cleaned on a regular basis. After you’ve addressed the “low hanging fruit”, next steps can involve choosing from a variety of longer term options that are designed to deliver much greater energy savings. Options should be considered based on their proven track record of success, whether they are “Approved” or “recommended” by organizations such as Energy Star, US DOE, USGBC, IEEE, etc., their cost effectiveness and return on investment as well as consistency with your hospital’s goals and culture Experience has shown that some of the better programs for hospitals include lighting upgrades to high efficiency fluorescent, CFL and/ or LED, use of occupancy sensors and day-lighting opportunities , sine wave modification for lighting circuits, liquid pressure amplification for central chiller plants, energy management based on occupancy, anti-compressor short cycling for roof top units, demand controlled ventilation, use of variable frequency drives and possibly equipment replacement for older systems that are approaching the end of their useful life. As you move forward with this, it helps to know that you don’t have to do it alone. There are experienced firms who can help make recommendations and provide turnkey services for you. In choosing a partner to guide this type of “whole facility” approach for you, it is important to look at a number of factors. You may want to ask the following: What is their level of experience using these various technologies, do they use proven and recommended approaches, what are the credentials of their staff, are they members of key industry organizations, what is their level of knowledge of your industry, do they offer a free initial evaluation and do they offer guarantees at each step of their process.

And remember that the sooner you begin, the sooner you start saving your hospital’s valuable and limited resources.

Save Money On Your Company’s Energy Bill, visit Energy Edge Technologies site for strategies on saving a tremendous amount of capital on your Corporate Energy Bill or call 888-729-5722 Ext. 100.